Effects of Polymer Bridging and Electrostatics on the Rheological Behavior of Aqueous Colloidal Dispersions†

Effects of a low molecular weight physically adsorbed polyethylene oxide (PEO) and the range of the electrostatic repulsion on the rheological behavior of silica dispersions (as a model system) has been investigated. Particular attention is given to the evolution of the rheological behavior with increasing the polymer concentration in the system and also effectiveness of the polymer as a dispersant under extreme conditions (high ionic strength). Results indicate that at small separation distances and low polymer coverage, the polymer chains are long enough to adsorb on the surface of two particles simultaneously causing bridging flocculation in the system and hence increasing the viscosity and linear viscoelastic functions of the dispersion. A significant increase was observed in the viscosity of the dispersion at salt concentrations high enough to eliminate electrostatics between the particles. Under these conditions,the viscosity of the system increased significantly when PEO was added to the dispersion showing that at high electrolyte concentrations, a neutral polymer such as PEO is not able to stabilize the system.     

A high-speed high-sensitivity acoustic cell for in-line continuous monitoring of MOCVD precursor gases

We describe a continuous wave resonant acoustic sensor that has been optimized as a very sensitive in-line monitor for measuring the composition of precursor gases used in MOCVD processes. The precursor/carrier gas mixtures flow through a compact stainless steel acoustic chamber that is isolated from the acoustic transducers by a set of metallic diaphragms. The sensor has been successfully operated at supply line pressures from atmosphere down to 50 Torr with gas flow rates of up to 1600 sccm. The accuracy of the speed of sound measurement for hydrogen gas is better than 0.005%, even in a high noise and low pressure environment. Hydrogen, as well as nitrogen or argon carrier gases, are accommodated within the instrument's 1–5 kHz working frequency range. The instrument's sensitivity and stability are demonstrated with the laboratory data. Measurements of the dynamic response characteristics of the metalorganic bubbler lines at low pressure are also be presented. Application of the cell is general, encompassing any of the metalorganic and hydride materials typically used in MOCVD processes.     

Natural radioactivity of Zambian coal and coal ash

²²⁶Ra and²³²Th specific activities in coal from Maamba Collieries in Zambia have been measured at 46±8 and 56±9 Bq kg^–1, respectively. These values are nearly two and a half times larger than the world average for coal and are close to those for lignite or brown coal. Determination of specific activities in coal waste at Maamba and coal ash at the fertilizer factory in Kafue showed enhancement factors of 2.6 and 2.0, respectively. These values are well within the world range of enhancement factors in coal ash.     

Thermostability of <Emphasis Type="Italic">Cromobacterium viscosum</Emphasis> lipase in AOT/isooctane reverse micelle

The thermostability of Cromobacterium viscosum lip ase (EC 3.1.1.3) entrapped in AOT (sodium bis-[2-ethylhexyl] sulfosuccinate) reverse micelles was in creased by the addition of short-chain polyethylene glycol (PEG 400). Two different approaches were considered: (1) the determination of half-life time and (2) the mechanistic analysis of deactivation kinetics. The half-life of lipase entrapped in AOT/isooctane reverse micelles with PEG 400 at 60°C was 28h, ninefold higher than that in reverse micelles without PEG 400. The lip ase entrapped in both reverse micellar systems followed a series-type deactivation mechanism involving two first-order steps. The deactivation constant for the first step at 60°C in PEG containing reverse micelles was 0.055 h¹¹, 11-fold lower than that in reverse micelles without PEG, whereas it remained almost constant for the second step. The inactivation energy of the lip ase entrapped in reverse micelles with and without PEG 400 was 88.12 and 21.97 kJ/mol, respectively.     

Radiation-induced decoloration of oxazine in ethanolic solution

The decoloration yield of oxazine 720 in ethanolic solution was studied as a function of dose rate and concentration of the dye. Linear response for G values to a dose of 1.68 KGy was observed for various dye concentrations. The effect of various organic substances in the radiolysis of the dye was studied and the results were interpreted in terms of scavenging reactions.     

Role of Electrostatic Repulsion on the Viscosity of Bidisperse Silica Suspensions

The flow behavior of bidisperse aqueous silica suspensions has been studied at different electrolyte concentrations as a function of shear rate, total volume fraction of the particles, and volume ratio of small to large particles. It is shown that the range of the electrostatic repulsion plays an important role in determining the viscosity of the suspension. Binary mixtures of particles of longer range repulsive forces showed higher viscosities than the suspensions of shorter range electrostatic interactions. Bimodal suspensions of long-range interactions showed non-Newtonian behavior over wider ranges of shear due to the deformation of the ionic cloud around the particles, which is larger in these systems. The viscosity of bimodal suspensions used in this study was scaled with respect to the viscosity of the related monosized systems and the viscosity of one bimodal suspension at a fixed total volume fraction of the particles, employing our earlier scaling method. The model normalizes the effect of colloidal forces by introducing a scaling factor that collapses the data into a single curve for bimodal suspensions of a particular size ratio, and it is shown that the model is valid for systems with both short-range and long-range repulsive forces. Copyright 1999 Academic Press.     

Viscosity of concentrated colloidal suspensions: comparison of bidisperse models

In this paper, recent advances in the study of rheological behavior of concentrated bimodal suspensions are briefly reviewed. The predictive models are divided into two categories, namely, the effective volume fraction (or hard sphere scaling) approach and the separation of contributions approach. Predictions of both approaches are compared with experimental data of electrostatically and sterically stabilized suspensions. It is shown that the predictions of both hard sphere scaling and the scaling method of Zaman and Moudgil (J. Colloid Interface Sci. 212 (1999) 167) to separate the contributions of fine and coarse particles are in good agreement with the experimentally observed results. The approach by Dames, Morrison, Wilenbacher (Rheol. Acta 40 (2001) 434) to separate the hard-sphere and non-hard-sphere contributions is investigated using the aqueous silica and polystyrene suspensions respectively. A good agreement is shown for aqueous silica suspensions. However, significant differences between the predictions and experimental data are found for the sterically stabilized polystyrene suspensions, suggesting a more generalized expression is needed. As an attempt to classify the models on the viscosity of colloidal suspensions, the present study will provide guidelines for interpretation of experimental results and for the development of more comprehensive predictive methodologies for polydispersed colloidal dispersions.     

Measurement of excitation functions of the natAg(α,x) reactions up to 45 MeV

Journal of Radioanalytical and Nuclear Chemistry - We measured excitation functions for the production of the 108m,108g,109g,110m,110g,111gIn, the 109g,111mCd, and the 105g,106m,110m,111gAg in...     

Partial Hydrolysis of Cyanide Coordination Polymers Induced by a Pillar Ligand with Optimized Electrochemical Kinetics for Rechargeable Alkaline Batteries

Coordination polymers are promising cathode materials for rechargeable alkaline batteries. Therefore, the precise modulation of these cathodes by chemical structure and in-depth structure transform study is necessary. Here, two model coordination polymer battery cathodes were designed to demonstrate the dynamic structure–performance relationship. We studied the electrochemical performance of two kinds of nickel-based coordination polymer, comprising a planar 2D cyanide-bridged network and a 3D cyanide-bridged network pillared by pyrazine molecules. The 2D coordination polymer showed serious voltage degradation with poor rate capability, whereas the 3D coordination polymer exhibited stable voltage output coupled with high rate at various current densities. The investigation revealed the underlining relationship of plateau voltage degradation and hydrolysis process of electrodes. It was revealed that the pyrazine pillar molecules in the 3D coordination polymer could suppress the hydrolysis and lead to the in situ formation of partially hydrolyzed structure with excellent electrochemical kinetics; this exhibited obvious smaller peak separation (27 mV compared with 149 mV) and hence an almost twofold increase in capacity retention (31.9 to 50.0 %) and energy density retention (18.2 to 35.9 %) at 10 A g⁻¹.     

Measurement of <Superscript>99</Superscript>Mo production cross-section from the <Superscript>100</Superscript>Mo(n,2n) reaction with quasi monoenergetic neutron based on the <Superscript>9</Superscript>Be(p,n) reaction

The production cross-section of the medical isotope, ⁹⁹Mo from the enriched ¹⁰⁰Mo(n,2n) reaction with the average neutron energies of 21.9 and 26.5 MeV has been determined for the first time by using an off-line γ-ray spectrometric technique. The average neutron energies were generated by using the ⁹Be(p,n) reaction with the proton energies of 35 and 45 MeV from the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences (KIRAMS) at Seoul, South Korea. The ¹⁰⁰Mo(n,2n) reaction cross-section as a function of neutron energy was also calculated theoretically by using the computer code TALYS-1.8 and EMPIRE-3.2 Malta. The experimental results are in close agreement with the theoretical values from TALYS-1.8. However, the present data at the neutron energy of 21.9 MeV is slightly lower and at 26.5 MeV is higher than the values from EMPIRE-3.2 Malta.